.png)
Ridgeline Western Construction
Framing • Additions • New Construction • Remodeling • Residential • Commercial
Door Replacement
Door replacement covers everything from swapping out a damaged entry door to installing all new interior doors during a remodel. Ridgeline Western Construction manages removal, sizing, framing adjustments, and installation with a focus on solid fit and smooth function. We self-perform carpentry and coordinate any needed other trades under one contract, making sure doors close right and pass inspection.
Why Choose Ridgeline Western Construction for Door Replacement
Door replacement can mean updating an old or weathered entry, replacing a warped interior door, or handling all new doors as part of a renovation. Sometimes the door slab is all that needs changing. Other times, replacing the whole pre-hung assembly is required because of old frames, past water intrusion, or out-of-square openings. Some jobs call for light framing correction, especially in older houses with settling.
Ridgeline Western Construction starts with a look at your existing openings to see if we’re dealing with standard or custom sizes, whether jambs or threshold need replacement, and to check sill conditions. Entry doors get extra attention for weatherproofing, security hardware, and insulated assemblies. For fire-rated doors, such as between a garage and living space, we confirm labels and closure hardware meet code. If wall repairs, electrical adjustments, or paint touch-ups are needed, we schedule the necessary licensed sub-trades. Every phase is managed and documented for a clean permit close if the job calls for one.
Your finished door should swing freely, latch tight, and look right. We make sure everything fits and operates as intended, with any required smoke seals, weatherstripping, or security hardware installed. If local code or HOA guidelines call for upgrades, we handle those and document compliance. The result is a solid door that looks and works right, with the installation ready for inspection or daily use.
Integrated Trade Management
When door replacement touches electrical (like wired doorbells, sidelights, or security sensors) or requires wall or paint repairs, Ridgeline Western Construction schedules the right licensed subcontractors. The whole project is managed under one contract and coordinated schedule, so you do not have to manage multiple trades and timelines yourself.
Code and Security Compliance
We install exterior and fire-rated doors to the current building code, verifying the right rating, latching hardware, and thresholds at entries and garage openings. Security upgrades like deadbolts, multi-point locks, or reinforced jambs are built in as part of the process. Where city permit or HOA approval is needed, we coordinate those details and manage required inspections.
Full Door and Jamb Replacement
Ridgeline Western Construction handles both slab swaps and full pre-hung door assemblies, so we correct structural and fit issues along with the door itself. Out-of-square frames, past water damage, or settling often call for partial reframing or new trim. Because we self-perform this work as framing specialists, your door closes and seals correctly. No gaps, no sticking, and trim returned clean.
Need Door Replacement?
Get your door replacement estimate today.
About Our Door Replacement Services
Ridgeline Western Construction is owner-operated by Steven Moreno, a general contractor and framing specialist who is on every project from scope meeting through final walkthrough. Door replacement, whether simple or complex, always comes back to how the opening is framed and finished. We self-perform carpentry, manage adjustments for out-of-square openings, and coordinate related trades so your new door fits, closes, and looks right. Every step from removal through inspection is managed by us—one contractor, one contract, and clear accountability until the job is finished.
WHY PROPERTY OWNERS CHOOSE US
5 Star Rated ★
Licensed & Insured ⛨
ABOUT US
Ridgeline Western Construction
Frequently Asked Questions
Yes. Ridgeline Western Construction is a licensed California Class B general building contractor, fully insured.
Our license number is #1147197Ridgeline Western Construction is based out of San Bernardino serving them and communities throughout southern California including Riverside, Los Angeles, and Orange County.
If you don't see your city listed, reach out and we'll confirm coverage.Framing, home additions, ADU construction, new home construction, whole-home remodeling, structural work, fire damage rebuilds, and commercial construction in Fontana, CA & throughout San Bernadino. The Owner Steven Moreno is an expert in framing and carpentry with anything falling outside of expertise being managed through him allowing you to have your building under one contract.
Yes. Every starts with engineering and permitting mapped out, and closes with inspections and a completed permit record from the building department. You get documentation for every phase.
Framing and carpentry are performed by us. Electrical, plumbing, HVAC, and roofing are handled by licensed subcontractors that we schedule and manage under the same contract that way you have one point of contact for your project.
Call or text Steven at +1 (909) 676-2814. Go over your project, plans or interest in a plan.. Then he'll walk through the scope and put together an estimate for you to continue
OTHER SERVICES
Ridgeline Western Construction offers a full range of construction services throughout San Bernardino, Riverside, Los Angeles, and Orange counties.
Home Additions
A home addition is a major structural project, not just an expansion of space. Ridgeline Western Construction manages every phase, from structural planning and engineering to permits, framing, finishing, and inspections. One contract covers all trades—the framing and carpentry are always self-performed, and every specialist is scheduled and supervised to keep the work moving as a single project. You get a finished addition designed to meet code, with a permit record that documents every inspection step.
Home Remodeling
Whole home remodeling replaces outdated layouts, worn finishes, and compromised framing with new structure, systems, and interiors under a single contract. Ridgeline Western Construction manages the entire process from design, permits, and engineering to framing, utilities, and all finish work. All framing and carpentry are self-performed, every subcontracted trade is managed, and inspections are scheduled in the right order. You get a unified project that delivers a complete, code-compliant home.
Commercial Remodeling
Commercial remodeling brings offices, retail locations, and workspaces up to current needs—whether through new layouts, finishes, or mechanical upgrades. Ridgeline Western Construction manages every phase, from the initial walkthrough to city inspection sign-off. We coordinate structural changes, framing, carpentry, and all subcontracted trades so you get a remodel that meets code and fits business operations with one point of contact.
Some property types we work on
What Our Clients Say about us..
"I connected with Steven Moreno at Ridgeline Western Construction about a year ago when I was scoping out a project. Steven’s knowledge blew me away from framing, additions, new construction, materials, etc. He broke everything down like it was nothing & in a way that I actually could understand. The company is based out of Fontana and covers a huge range from San Bernardino and Riverside all the way through Los Angeles and Orange County. So if you’re in that area and need a general contractor that you can rely on then I would highly recommend Ridgeline Western Construction to get the job done right."
- Thomas Shields
.png)
.png)
GET STARTED
TEXT/CALL (909) 676-2814
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.