.png)
Ridgeline Western Construction
Framing • Additions • New Construction • Remodeling • Residential • Commercial
Window Installation
Window installation upgrades the function, comfort, and look of a building with new, code-compliant windows set and flashed to current standards. Ridgeline Western Construction manages the full process, from measurement and selection through removal of the old units and precise fitting of new assemblies. We coordinate any needed repairs to framing, stucco, or siding as part of the installation. The completed project is built for a clean permit record and clear inspection sign-off.
Why Choose Ridgeline Western Construction for Window Installation
Older windows can bring draft, water intrusion, condensation between panes, or uneven operation. Whether your goal is energy savings, safety, code compliance, or restoring a weathered exterior, window replacement addresses both the appearance and performance of a building. The difference lies in the install: tight fit, correct shimming, and the right flashing details are what keep moisture and air out.
Ridgeline Western Construction starts with detailed measuring so that each new window fits the existing opening or new rough opening with minimum adjustment. Window assemblies are installed according to manufacturer instructions and local code, using Title 24-compliant units and proper flashing, sealants, and insulation around the perimeter. Where stucco or siding is disturbed, we repair and blend it for a finished look, scheduling all required trades under one contract. Electrical, when affected, is handled by licensed subcontractors.
Every installation ends with an inspection for operation and finish, and window permits are closed out to city standards. You receive code documentation and know the installation was built for durability from the rough opening out—not just pressed into the wall.
Correct Flashing and Air & Water Seal
Flashing and sealing are what keeps water out and air from leaking around the window. We use modern flashing tape, compatible sealants, and backer rod to build a drainage plane that meets code and manufacturer specs. Done properly, this protects your building from leaks and preserves insulation values—something skipped in many older installs or quick replacements.
Integrated Finish and Trade Management
Window installation almost always touches more than just the opening—stucco, siding, drywall, and sometimes trim or paint are affected. Ridgeline Western Construction schedules and manages all needed sub-trades under one contract, so you get a unified project rather than pieced-together fixes. The result is a finished look inside and out, delivered on a schedule managed to minimize disruption.
Precise Framing and Opening Prep
Ridgeline Western Construction checks opening dimensions and structural conditions before any window goes in. Proper prep involves checking for damaged sill plates, rot around the perimeter, or framing that may need reinforcement. This ensures your new windows are installed into sound structure, not just patched over old issues. It also means fewer surprises at inspection and a more secure, weather-tight finished product.
Need Window Installation?
Get your window installation estimate today.
About Our Window Installation Services
Ridgeline Western Construction is owner-operated by Steven Moreno, a general contractor and framing specialist who is on every project from scope meeting through final walkthrough. For window installation, that means the person checking your opening and setting the window is someone who understands structure, flashing, and the trades required for a clean install. We self-perform the carpentry and coordinate licensed subcontractors for any electrical or finish work needed. The job runs under one contract and ends with a window installation built to current code and closed out with a clean permit record. Bonded and insured, based in Fontana and serving a wide region, we are built to last—window to wall.
WHY PROPERTY OWNERS CHOOSE US
5 Star Rated ★
Licensed & Insured ⛨
ABOUT US
Ridgeline Western Construction
Frequently Asked Questions
Yes. Ridgeline Western Construction is a licensed California Class B general building contractor, fully insured.
Our license number is #1147197Ridgeline Western Construction is based out of San Bernardino serving them and communities throughout southern California including Riverside, Los Angeles, and Orange County.
If you don't see your city listed, reach out and we'll confirm coverage.Framing, home additions, ADU construction, new home construction, whole-home remodeling, structural work, fire damage rebuilds, and commercial construction in Fontana, CA & throughout San Bernadino. The Owner Steven Moreno is an expert in framing and carpentry with anything falling outside of expertise being managed through him allowing you to have your building under one contract.
Yes. Every starts with engineering and permitting mapped out, and closes with inspections and a completed permit record from the building department. You get documentation for every phase.
Framing and carpentry are performed by us. Electrical, plumbing, HVAC, and roofing are handled by licensed subcontractors that we schedule and manage under the same contract that way you have one point of contact for your project.
Call or text Steven at +1 (909) 676-2814. Go over your project, plans or interest in a plan.. Then he'll walk through the scope and put together an estimate for you to continue
OTHER SERVICES
Ridgeline Western Construction offers a full range of construction services throughout San Bernardino, Riverside, Los Angeles, and Orange counties.
Home Additions
A home addition is a major structural project, not just an expansion of space. Ridgeline Western Construction manages every phase, from structural planning and engineering to permits, framing, finishing, and inspections. One contract covers all trades—the framing and carpentry are always self-performed, and every specialist is scheduled and supervised to keep the work moving as a single project. You get a finished addition designed to meet code, with a permit record that documents every inspection step.
Siding Installation
Siding installation by Ridgeline Western Construction means one contract covering removal of old siding, assessment and repair of underlying framing, installation of new siding systems, and final paint or finish. We self-perform framing and carpentry, manage the entire project sequence, and coordinate any stucco, window integration, or other trades the job requires. Siding projects are built to pass inspection and close clean, whether it is fiber cement, engineered wood, or traditional lap siding.
Structural Repairs
Structural repairs address failures in a building’s framing, supports, or load paths that compromise stability or safety. Ridgeline Western Construction assesses visible symptoms — such as cracks in walls, sloping floors, or sticking doors — and traces them to structural causes like deteriorated joists, broken beams, or damaged shear walls. We deliver repairs from assessment through city inspection, rebuilding compromised structure and managing every required trade. You get one contractor who diagnoses, repairs, and sees the project to completion with a permit record that clears.
Some property types we work on
What Our Clients Say about us..
"I connected with Steven Moreno at Ridgeline Western Construction about a year ago when I was scoping out a project. Steven’s knowledge blew me away from framing, additions, new construction, materials, etc. He broke everything down like it was nothing & in a way that I actually could understand. The company is based out of Fontana and covers a huge range from San Bernardino and Riverside all the way through Los Angeles and Orange County. So if you’re in that area and need a general contractor that you can rely on then I would highly recommend Ridgeline Western Construction to get the job done right."
- Thomas Shields
.png)
.png)
GET STARTED
TEXT/CALL (909) 676-2814
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.