.png)
Ridgeline Western Construction
Framing • Additions • New Construction • Remodeling • Residential • Commercial
Foundation Bolting
Foundation bolting anchors a wood-framed building to its concrete foundation. Ridgeline Western Construction evaluates current anchorage, sources engineered hardware, and installs bolts and seismic connectors to current standards. We manage permits, inspections, and close the job with one contractor responsible from start to finish.
Why Choose Ridgeline Western Construction for Foundation Bolting
Older homes and buildings often lack the foundation anchorage current codes require. Shifting and sliding can result during seismic events, leading to costly structural failures even when the framing itself is sound. Foundation bolting secures the wood sill plate of your structure to the concrete foundation, reducing the risk of movement in an earthquake.
Ridgeline Western Construction begins by inspecting which areas are currently anchored, which need upgrading, and whether access is available along the foundation perimeter. We specify and install mechanical anchor bolts, sill plates, and seismic connectors like Simpson Strong-Tie hardware, using either expansion-type bolts or epoxy-set anchors based on engineering requirements and slab condition. Permits and city plan check are handled directly, and all work is performed to pass inspection under current codes. One honest tradeoff: in some cases, tight crawlspaces can drive up labor time compared to more accessible perimeters.
The project closes with city inspection and documentation reflecting the improvement. You receive a permit record showing code-compliant attachment, which may satisfy insurance or ordinance requirements. The house remains much less likely to shift during seismic activity, and you know exactly what’s now bolted and where.
Permit Management and Inspection
All required permits are pulled by Ridgeline Western Construction and scheduled directly. We follow the inspection sequence, document all phases, and the improvement is recorded with your city or county. The completed job closes with sign-off and records you can present to insurers or new buyers.
Engineered Seismic Hardware
We use mechanical anchor bolts and seismic connectors that match current code—expansion bolts, epoxy-set anchors, and plate washers compatible with existing concrete and lumber. All hardware is installed per manufacturer and engineering guidelines for maximum hold in seismic events—not just meeting minimum standards.
Framing-Level Assessment
Ridgeline Western Construction’s owner, a framing specialist, examines the structure directly and identifies both visible and hidden anchorage gaps. This diagnostic approach means bolts are installed where most needed, not only where accessible, so your foundation bolting job addresses the whole structure beneath the floor line.
Need Foundation Bolting?
Get your foundation bolting estimate today.
About Our Foundation Bolting Services
Ridgeline Western Construction is owner-operated by Steven Moreno, a general contractor and framing specialist who is on every project from the first assessment through the final walkthrough. Foundation bolting is structural work—our direct involvement means no anchorage gaps get missed during assessment, and every bolt is installed to meet current seismic standards. We self-perform this work, coordinate any subcontracted trades if needed, manage permits, and keep the job under one contract—clear from start to completion.
WHY PROPERTY OWNERS CHOOSE US
5 Star Rated ★
Licensed & Insured ⛨
ABOUT US
Ridgeline Western Construction
Frequently Asked Questions
Yes. Ridgeline Western Construction is a licensed California Class B general building contractor, fully insured.
Our license number is #1147197Ridgeline Western Construction is based out of San Bernardino serving them and communities throughout southern California including Riverside, Los Angeles, and Orange County.
If you don't see your city listed, reach out and we'll confirm coverage.Framing, home additions, ADU construction, new home construction, whole-home remodeling, structural work, fire damage rebuilds, and commercial construction in Fontana, CA & throughout San Bernadino. The Owner Steven Moreno is an expert in framing and carpentry with anything falling outside of expertise being managed through him allowing you to have your building under one contract.
Yes. Every starts with engineering and permitting mapped out, and closes with inspections and a completed permit record from the building department. You get documentation for every phase.
Framing and carpentry are performed by us. Electrical, plumbing, HVAC, and roofing are handled by licensed subcontractors that we schedule and manage under the same contract that way you have one point of contact for your project.
Call or text Steven at +1 (909) 676-2814. Go over your project, plans or interest in a plan.. Then he'll walk through the scope and put together an estimate for you to continue
OTHER SERVICES
Ridgeline Western Construction offers a full range of construction services throughout San Bernardino, Riverside, Los Angeles, and Orange counties.
Home Additions
A home addition is a major structural project, not just an expansion of space. Ridgeline Western Construction manages every phase, from structural planning and engineering to permits, framing, finishing, and inspections. One contract covers all trades—the framing and carpentry are always self-performed, and every specialist is scheduled and supervised to keep the work moving as a single project. You get a finished addition designed to meet code, with a permit record that documents every inspection step.
Structural Repairs
Structural repairs address failures in a building’s framing, supports, or load paths that compromise stability or safety. Ridgeline Western Construction assesses visible symptoms — such as cracks in walls, sloping floors, or sticking doors — and traces them to structural causes like deteriorated joists, broken beams, or damaged shear walls. We deliver repairs from assessment through city inspection, rebuilding compromised structure and managing every required trade. You get one contractor who diagnoses, repairs, and sees the project to completion with a permit record that clears.
Earthquake Retrofit
Earthquake retrofitting anchors your house to its foundation and adds connections where old framing is missing or weak. Ridgeline Western Construction reviews your crawlspace for the right hardware, bracing, and anchorage, then manages the engineering, permits, and construction to bring your building up to seismic standards. Our process minimizes hidden disruptions and closes with documented compliance you can prove.
Some property types we work on
What Our Clients Say about us..
"I connected with Steven Moreno at Ridgeline Western Construction about a year ago when I was scoping out a project. Steven’s knowledge blew me away from framing, additions, new construction, materials, etc. He broke everything down like it was nothing & in a way that I actually could understand. The company is based out of Fontana and covers a huge range from San Bernardino and Riverside all the way through Los Angeles and Orange County. So if you’re in that area and need a general contractor that you can rely on then I would highly recommend Ridgeline Western Construction to get the job done right."
- Thomas Shields
.png)
.png)
GET STARTED
TEXT/CALL (909) 676-2814
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.