.png)
Ridgeline Western Construction
Framing • Additions • New Construction • Remodeling • Residential • Commercial
Load-Bearing Wall Removal
Load-bearing wall removal means opening up spaces by taking out structural walls safely and correctly. Ridgeline Western Construction evaluates framing, load paths, and shear points before any wall comes down. We coordinate engineering, secure the permit, handle inspections, and manage all steps from shoring to finish. You get open space where the structure stays sound, and your permit record matches what was built.
Why Choose Ridgeline Western Construction for Load-Bearing Wall Removal
Most interior walls are partitions, but a load-bearing wall carries the structure above it. Removing one changes the way loads transfer downward, so the process starts with a framing inspection—looking for doubled top plates, offset joists, and which beams or posts share the load. An expert eye is required to spot clues behind drywall or plaster before demo begins.
Ridgeline Western Construction brings in structural engineering if the wall is load-bearing. We coordinate the drawings, submit them for permit, and plan the temporary shoring during removal. New beams—LVL, glulam, or steel—replace the structural support, tied into post connections and foundation as needed. All framing is installed to meet code, then the wall is finished with drywall, trim, and paint.
City inspection checks that the structure is supported exactly as engineered. Once signed off, you’re left with the open space you wanted, finished and legal, with no mystery about what was hidden behind the wall or what replaced it.
Permit and Inspection Transparency
We coordinate the engineered beam calculations, submit them for approval, document what material was installed, and schedule every required inspection. At the end, your permit record matches the work and the finish lets you use your new space confidently, without uncertainty over hidden structure or missed steps.
One Contract from Demo to Finish
Every step is managed under one agreement: engineering and permits, shoring, structural beam installation, patching drywall, and painting. We schedule and supervise every licensed subcontractor needed—electrical or HVAC reroutes, finish carpentry, and any plumbing or lighting changes. Nothing is left piecemeal or handed off to the next trade without oversight.
Framing-First Assessment
Ridgeline Western Construction starts by opening up just enough to see the framing above, below, and within the wall. The owner, a framing specialist, checks joist direction, connections, and how loads currently transfer. This assessment reveals which walls are truly structural and shapes the engineering needed. Knowing what is structural up front reduces false starts and keeps your project on track.
Need Load-Bearing Wall Removal?
Get your load-bearing wall removal estimate today.
About Our Load-Bearing Wall Removal Services
Ridgeline Western Construction is owner-operated by Steven Moreno, a general contractor and framing specialist who is on every project from scope meeting through final walkthrough. Load-bearing wall removal is high-stakes framing work—one wrong move compromises your structure. We handle the assessment, coordinate engineering, supervise framing and finish trades, and take responsibility for the permit and inspection process start to finish. The result is a space opened up legally, safely, and to code, managed by someone who reads structure first, not last.
WHY PROPERTY OWNERS CHOOSE US
5 Star Rated ★
Licensed & Insured ⛨
ABOUT US
Ridgeline Western Construction
Frequently Asked Questions
Yes. Ridgeline Western Construction is a licensed California Class B general building contractor, fully insured.
Our license number is #1147197Ridgeline Western Construction is based out of San Bernardino serving them and communities throughout southern California including Riverside, Los Angeles, and Orange County.
If you don't see your city listed, reach out and we'll confirm coverage.Framing, home additions, ADU construction, new home construction, whole-home remodeling, structural work, fire damage rebuilds, and commercial construction in Fontana, CA & throughout San Bernadino. The Owner Steven Moreno is an expert in framing and carpentry with anything falling outside of expertise being managed through him allowing you to have your building under one contract.
Yes. Every starts with engineering and permitting mapped out, and closes with inspections and a completed permit record from the building department. You get documentation for every phase.
Framing and carpentry are performed by us. Electrical, plumbing, HVAC, and roofing are handled by licensed subcontractors that we schedule and manage under the same contract that way you have one point of contact for your project.
Call or text Steven at +1 (909) 676-2814. Go over your project, plans or interest in a plan.. Then he'll walk through the scope and put together an estimate for you to continue
OTHER SERVICES
Ridgeline Western Construction offers a full range of construction services throughout San Bernardino, Riverside, Los Angeles, and Orange counties.
Home Additions
A home addition is a major structural project, not just an expansion of space. Ridgeline Western Construction manages every phase, from structural planning and engineering to permits, framing, finishing, and inspections. One contract covers all trades—the framing and carpentry are always self-performed, and every specialist is scheduled and supervised to keep the work moving as a single project. You get a finished addition designed to meet code, with a permit record that documents every inspection step.
Structural Repairs
Structural repairs address failures in a building’s framing, supports, or load paths that compromise stability or safety. Ridgeline Western Construction assesses visible symptoms — such as cracks in walls, sloping floors, or sticking doors — and traces them to structural causes like deteriorated joists, broken beams, or damaged shear walls. We deliver repairs from assessment through city inspection, rebuilding compromised structure and managing every required trade. You get one contractor who diagnoses, repairs, and sees the project to completion with a permit record that clears.
Support Beam Installation
Support beam installation addresses sagging floors, settling walls, or the removal of load-bearing walls by replacing lost or insufficient structural support. Ridgeline Western Construction evaluates the framing, calculates the necessary beam size and placement, and installs engineered beams or posts from footing to fastening. This process protects the structure, restores strength, and makes sure the home stays stable for remodels, repairs, or retrofits.
Some property types we work on
What Our Clients Say about us..
"I connected with Steven Moreno at Ridgeline Western Construction about a year ago when I was scoping out a project. Steven’s knowledge blew me away from framing, additions, new construction, materials, etc. He broke everything down like it was nothing & in a way that I actually could understand. The company is based out of Fontana and covers a huge range from San Bernardino and Riverside all the way through Los Angeles and Orange County. So if you’re in that area and need a general contractor that you can rely on then I would highly recommend Ridgeline Western Construction to get the job done right."
- Thomas Shields
.png)
.png)
GET STARTED
TEXT/CALL (909) 676-2814
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.