
Ridgeline Western Construction
Framing • Additions • New Construction • Remodeling • Residential • Commercial
Sagging Floor Repair
Sagging floor repair restores structural support when framing underneath a floor drops, bows, or loses strength. Ridgeline Western Construction inspects from below to find the failed joist, beam, post, or subfloor, not just the low spot above. Repairs use new lumber, engineered beams, or sistering methods as needed. We self-perform the framing and coordinate all related trades under a single contract, finishing with a walkthrough you can check for flatness and stability. The finished repair aligns, strengthens, and documents what actually failed.
Why Choose Ridgeline Western Construction for Sagging Floor Repair
A sagging floor can show up as doors sticking, cracks in drywall at the corners, or furniture tilting toward the center of a room. Sometimes the slope is visible; other times it's a soft bounce or creak underfoot. Common causes are moisture damage, over-spanned joists, failed posts or piers, termites, or subfloor rot. Every symptom gets traced below the surface, where the real problem shows.
Ridgeline Western Construction starts by crawling under the house or opening a ceiling below to pinpoint which member lost load-bearing capacity. The scope might call for sistering joists with new dimensional lumber, dropping in an LVL or glulam beam, shoring up posts, or rebuilding a section of the subfloor and sheathing. We use Simpson Strong-Tie hardware for connections, and, when part of a larger remodel, coordinate electrical or plumbing reroutes that a new beam makes necessary. Repair means some demo and patch, but doing it right keeps the house on its feet.
Inspections can be required if the repair involves major structural work or permit scopes. We manage the permit, inspections, and compliance records, so the project closes with sign-off and documentation. By finishing with a walkthrough and a level check, you can see—and feel—the difference in stability.

Permit, Compliance, and Walkthrough
If structural repair requires a permit or inspection, we pull the permit, schedule required inspections, and verify compliance before closing. The finished repair gets a final walkthrough—floor checked for flatness and firmness—so you see the result firsthand. Completion includes compliance records, photos of the work underneath, and direct communication so you know what was fixed and why.

Engineered Lumber and Modern Connection Methods
We use dimensional lumber for common repairs and engineered beams like LVLs or PSLs for spans or higher loads. Simpson Strong-Tie connectors and modern shear hardware reinforce the repair, and any posts, footings, or sheathing replaced meets current structural code. This approach extends the useful life of the repaired area rather than just restoring it to the status quo.

Framing-Based Structural Assessment
Ridgeline Western Construction brings a framing specialist to every sagging floor repair. We identify which joist, beam, post, or subfloor member actually failed, not just where the floor dips. This inspection separates cosmetic fixes from structural repair, ensuring that the corrected span or support matches the load requirements for the area above. You get a solution designed from the structure up—not just surface patching.

Need Sagging Floor Repair?
Get your sagging floor repair estimate today.

About Our Sagging Floor Repair Services
Ridgeline Western Construction is owner-operated by Steven Moreno, a general contractor and framing specialist who is on every project from scope meeting through final walkthrough. For sagging floor repair, that means you work directly with the person who inspects your framing, explains where and why the floor has failed, and delivers the repair in-house instead of pushing patch jobs or passing off assessments. We keep all trades under one contract, self-perform structural carpentry, and manage the project for clean closure and visible improvement.

ABOUT US
Ridgeline Western Construction
.png)
Frequently Asked Questions
Yes. Ridgeline Western Construction is a licensed California Class B general building contractor, fully insured.
Our license number is #1147197Ridgeline Western Construction is based out of San Bernardino serving them and communities throughout southern California including Riverside, Los Angeles, and Orange County.
If you don't see your city listed, reach out and we'll confirm coverage.Framing, home additions, ADU construction, new home construction, whole-home remodeling, structural work, fire damage rebuilds, and commercial construction in Fontana, CA & throughout San Bernadino. The Owner Steven Moreno is an expert in framing and carpentry with anything falling outside of expertise being managed through him allowing you to have your building under one contract.
Yes. Every starts with engineering and permitting mapped out, and closes with inspections and a completed permit record from the building department. You get documentation for every phase.
Framing and carpentry are performed by us. Electrical, plumbing, HVAC, and roofing are handled by licensed subcontractors that we schedule and manage under the same contract that way you have one point of contact for your project.
Call or text Steven at +1 (909) 676-2814. Go over your project, plans or interest in a plan.. Then he'll walk through the scope and put together an estimate for you to continue
OTHER SERVICES
Ridgeline Western Construction offers a full range of construction services throughout San Bernardino, Riverside, Los Angeles, and Orange counties.

Home Additions
A home addition is a major structural project, not just an expansion of space. Ridgeline Western Construction manages every phase, from structural planning and engineering to permits, framing, finishing, and inspections. One contract covers all trades—the framing and carpentry are always self-performed, and every specialist is scheduled and supervised to keep the work moving as a single project. You get a finished addition designed to meet code, with a permit record that documents every inspection step.

Structural Repairs
Structural repairs address failures in a building’s framing, supports, or load paths that compromise stability or safety. Ridgeline Western Construction assesses visible symptoms — such as cracks in walls, sloping floors, or sticking doors — and traces them to structural causes like deteriorated joists, broken beams, or damaged shear walls. We deliver repairs from assessment through city inspection, rebuilding compromised structure and managing every required trade. You get one contractor who diagnoses, repairs, and sees the project to completion with a permit record that clears.

Floor Joist Repair
Floor joist repair restores structural strength where sagging, bouncy, or damaged floors create problems with support. Ridgeline Western Construction identifies the cause—rot, pest damage, or over-spanning—then repairs or replaces the affected joists to restore level, solid floors. Our process involves targeted demolition, assessment of adjoining framing, and framing with dimensional lumber and connectors that meet current code. You get one contractor managing the full repair and all follow-on trades under a single contract.
Some property types we work on

What Our Clients Say about us..
"I connected with Steven Moreno at Ridgeline Western Construction about a year ago when I was scoping out a project. Steven’s knowledge blew me away from framing, additions, new construction, materials, etc. He broke everything down like it was nothing & in a way that I actually could understand. The company is based out of Fontana and covers a huge range from San Bernardino and Riverside all the way through Los Angeles and Orange County. So if you’re in that area and need a general contractor that you can rely on then I would highly recommend Ridgeline Western Construction to get the job done right."
- Thomas Shields
.png)
.png)


GET STARTED
TEXT/CALL (909) 676-2814

Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.













