
Ridgeline Western Construction
Framing • Additions • New Construction • Remodeling • Residential • Commercial
Soffit & Fascia Installation
Soffit and fascia installation protects roof edges, keeps out pests, and ties the whole exterior together. Ridgeline Western Construction installs wood and composite soffit and fascia boards, addressing eave ventilation and moisture control as part of the job. Every install is managed by a framing specialist, so transitions, vents, and rooflines close tight and align cleanly with gutters and trim. We handle replacements on older homes as well as upgrades to vented assemblies or ignition-resistant profiles. Permit requirements are checked and every job is scoped for the right attachment, flashing, and finish.
Why Choose Ridgeline Western Construction for Soffit & Fascia Installation
Soffit and fascia problems are easy to spot: peeling paint, sagging boards, bird or rodent entry, and water-stained eaves all point to failure at the roof edge. Typical damage happens when unvented soffit traps moisture, or poorly flashed fascia lets water soak in behind the boards. A solution means matching material thickness, solid attachment to rafter tails, and proper venting if the attic needs it.
Ridgeline Western Construction starts by assessing the roof edge, checking for hidden rot or missing blocking, and recommending wood or composite boards that match the roof and siding. We self-perform the removal of old boards and prep the eaves for new installation, making sure vent openings, drip edges, and hidden fasteners are all built to last. If the area is in a fire zone, ignition-resistant assemblies are available and built to code. Finishing includes caulking, primer, paint or other specified coatings.
Every job closes with a walkthrough to confirm straight runs, clean miters, and tight seams. If permits or inspections are required, we document materials and fastening methods for the city’s review, and the new soffit and fascia are ready for paint, gutter installation, or inspection as needed.

Material and Detail Matching
Ridgeline Western Construction sources soffit and fascia boards in wood or composite, matching thickness, texture, and vented or solid profiles to your existing eaves and style. We handle priming, painting, and caulking as needed, and every seam, transition, and fastener is chosen to align with current roofing and siding details for a clean finished look.

Framing-Led Roof Edge Assessment
Soffit and fascia installation led by a framing specialist means you get a real assessment of the rafter tails, blocking, and ventilation behind the visible boards. We look for rot, improper flashing, and alignment issues before installation starts, so hidden problems are fixed as part of the job. This keeps roof edges solid and helps make sure water, pests, and debris stay out.

Permit and Code Compliance Management
Every soffit or fascia upgrade is checked for code requirements, especially in fire zones or older homes where attic ventilation and ignition-resistance matter. We verify permit triggers, document installation and materials, and coordinate any inspections the city requires. The process aims for a fully compliant result with all work visible for inspection or future maintenance.

Need Soffit & Fascia Installation?
Get your soffit & fascia installation estimate today.

About Our Soffit & Fascia Installation Services
Ridgeline Western Construction is owner-operated by Steven Moreno, a general contractor and framing specialist who is on every project from scope meeting through final walkthrough. This matters for soffit and fascia installation because roof edges are structural details—getting the rafter alignment, venting, and moisture control right during install prevents future rot and pest entry. We self-perform all framing and carpentry, manage any required permits or specialty trades, and keep the scope connected from removal of old materials to the last bit of paint. With Ridgeline Western Construction, you get a job built on framing knowledge, every time.

ABOUT US
Ridgeline Western Construction
.png)
Frequently Asked Questions
Yes. Ridgeline Western Construction is a licensed California Class B general building contractor, fully insured.
Our license number is #1147197Ridgeline Western Construction is based out of San Bernardino serving them and communities throughout southern California including Riverside, Los Angeles, and Orange County.
If you don't see your city listed, reach out and we'll confirm coverage.Framing, home additions, ADU construction, new home construction, whole-home remodeling, structural work, fire damage rebuilds, and commercial construction in Fontana, CA & throughout San Bernadino. The Owner Steven Moreno is an expert in framing and carpentry with anything falling outside of expertise being managed through him allowing you to have your building under one contract.
Yes. Every starts with engineering and permitting mapped out, and closes with inspections and a completed permit record from the building department. You get documentation for every phase.
Framing and carpentry are performed by us. Electrical, plumbing, HVAC, and roofing are handled by licensed subcontractors that we schedule and manage under the same contract that way you have one point of contact for your project.
Call or text Steven at +1 (909) 676-2814. Go over your project, plans or interest in a plan.. Then he'll walk through the scope and put together an estimate for you to continue
OTHER SERVICES
Ridgeline Western Construction offers a full range of construction services throughout San Bernardino, Riverside, Los Angeles, and Orange counties.

Siding Installation
Siding installation by Ridgeline Western Construction means one contract covering removal of old siding, assessment and repair of underlying framing, installation of new siding systems, and final paint or finish. We self-perform framing and carpentry, manage the entire project sequence, and coordinate any stucco, window integration, or other trades the job requires. Siding projects are built to pass inspection and close clean, whether it is fiber cement, engineered wood, or traditional lap siding.

Exterior Trim & Casing Installation
Exterior trim and casing installation creates the finished edges at doors, windows, corners, and rooflines. Ridgeline Western Construction installs wood and composite trim boards, moldings, and fascia as part of new construction, repairs, or remodels. We sequence trim after framing and siding, with careful flashing and nailing to prevent water intrusion and warping over time. One contract covers every trade needed, from demolition to painting.

Structural Repairs
Structural repairs address failures in a building’s framing, supports, or load paths that compromise stability or safety. Ridgeline Western Construction assesses visible symptoms — such as cracks in walls, sloping floors, or sticking doors — and traces them to structural causes like deteriorated joists, broken beams, or damaged shear walls. We deliver repairs from assessment through city inspection, rebuilding compromised structure and managing every required trade. You get one contractor who diagnoses, repairs, and sees the project to completion with a permit record that clears.
Some property types we work on

What Our Clients Say about us..
"I connected with Steven Moreno at Ridgeline Western Construction about a year ago when I was scoping out a project. Steven’s knowledge blew me away from framing, additions, new construction, materials, etc. He broke everything down like it was nothing & in a way that I actually could understand. The company is based out of Fontana and covers a huge range from San Bernardino and Riverside all the way through Los Angeles and Orange County. So if you’re in that area and need a general contractor that you can rely on then I would highly recommend Ridgeline Western Construction to get the job done right."
- Thomas Shields
.png)
.png)


GET STARTED
TEXT/CALL (909) 676-2814

Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.













