.png)
Ridgeline Western Construction
Framing • Additions • New Construction • Remodeling • Residential • Commercial
Dormer Addition
A dormer addition creates new usable space and brings in natural light by extending a roof line. Ridgeline Western Construction handles the structural engineering, framing, and all trades needed for a dormer, from plan check to interior finish. We keep the project under one contract and coordinate every step, so both roof and structure are built to current code and signed off at inspection.
Why Choose Ridgeline Western Construction for Dormer Addition
A dormer addition changes more than just the look of a house—it alters the roof framing, adds new load paths, and often involves complex tie-ins to existing structure. Common reasons for adding a dormer include needing a legal bedroom, raising headroom in an attic, or opening up upper-floor space to daylight and air circulation. Getting the geometry right matters or the new space can end up cramped or difficult to insulate.
Ridgeline Western Construction starts with structural assessment and engineering, then submits plans for city plan check to secure permits. The existing roof is demoed only after all framing and materials are ready on site, minimizing open exposure. We frame the new dormer using a mix of dimensional or engineered lumber—LVL, glulam, or PSL beams where needed—and tie it into the current roof, handling shear, waterproofing, and insulation. Trades like roofing, electrical, and drywall are scheduled in the correct order, so each builds on the last without sitting idle.
The project completes after city inspection and walk-through. You get usable, finished space with a clear permit record, and can be sure the new dormer meets code for energy, egress, and structural safety. Roof and finishes match or improve on the originals, not just patched in.
Complete Structural Integration
Ridgeline Western Construction brings framing expertise to every dormer addition. We determine where new beams, headers, or rafters are needed, and use both dimensional and engineered lumber to tie the dormer into your existing roof without compromising strength. This means the new space is built for long-term stability and passes framing inspection.
Single-Contract Project Management
We manage the dormer addition under one contract, from engineering and plan check to roof finish and paint. All subcontracted trades—roofing, electrical, insulation, drywall—are scheduled and supervised so they show up in the right order, and you know who is responsible throughout the job. Permit records and inspection closeouts are tracked and organized.
City Permits and Code Compliance
Every dormer addition goes through plan check, permit, and inspection steps with the city. We handle the full submittal process, coordinate structural and energy compliance, and schedule inspections at each phase. You end up with a finished dormer, a paper trail of compliance, and a space that actually adds value rather than complicating future sales or upgrades.
Need Dormer Addition?
Get your dormer addition estimate today.
About Our Dormer Addition Services
Ridgeline Western Construction is owner-operated by Steven Moreno, a general contractor and framing specialist who is on every project from scope meeting through final walkthrough. Dormer additions are structural undertakings, and having a contractor fluent in roof framing, engineering, and code is what makes the difference between a smooth project and one that stalls. We self-perform the framing work and coordinate every licensed subcontractor, ensuring your dormer is built to code, tracked through city inspection, and finished to match the rest of your home or building. Every phase stays under our management, and you always know who to call with a question or a change.
WHY PROPERTY OWNERS CHOOSE US
5 Star Rated ★
Licensed & Insured ⛨
ABOUT US
Ridgeline Western Construction
Frequently Asked Questions
Yes. Ridgeline Western Construction is a licensed California Class B general building contractor, fully insured.
Our license number is #1147197Ridgeline Western Construction is based out of San Bernardino serving them and communities throughout southern California including Riverside, Los Angeles, and Orange County.
If you don't see your city listed, reach out and we'll confirm coverage.Framing, home additions, ADU construction, new home construction, whole-home remodeling, structural work, fire damage rebuilds, and commercial construction in Fontana, CA & throughout San Bernadino. The Owner Steven Moreno is an expert in framing and carpentry with anything falling outside of expertise being managed through him allowing you to have your building under one contract.
Yes. Every starts with engineering and permitting mapped out, and closes with inspections and a completed permit record from the building department. You get documentation for every phase.
Framing and carpentry are performed by us. Electrical, plumbing, HVAC, and roofing are handled by licensed subcontractors that we schedule and manage under the same contract that way you have one point of contact for your project.
Call or text Steven at +1 (909) 676-2814. Go over your project, plans or interest in a plan.. Then he'll walk through the scope and put together an estimate for you to continue
OTHER SERVICES
Ridgeline Western Construction offers a full range of construction services throughout San Bernardino, Riverside, Los Angeles, and Orange counties.
Home Additions
A home addition is a major structural project, not just an expansion of space. Ridgeline Western Construction manages every phase, from structural planning and engineering to permits, framing, finishing, and inspections. One contract covers all trades—the framing and carpentry are always self-performed, and every specialist is scheduled and supervised to keep the work moving as a single project. You get a finished addition designed to meet code, with a permit record that documents every inspection step.
Home Remodeling
Whole home remodeling replaces outdated layouts, worn finishes, and compromised framing with new structure, systems, and interiors under a single contract. Ridgeline Western Construction manages the entire process from design, permits, and engineering to framing, utilities, and all finish work. All framing and carpentry are self-performed, every subcontracted trade is managed, and inspections are scheduled in the right order. You get a unified project that delivers a complete, code-compliant home.
Second Story Addition
Building a second story addition transforms a single-story property by adding new living space above the original structure. Ridgeline Western Construction handles the engineering, permit process, and construction, making structural assessment central from the start. With owner Steven Moreno on site, every phase—framing, trades, inspections—is managed under one contract until final sign-off. The end result is more square footage, delivered to current code, and a clean permit record.
Some property types we work on
What Our Clients Say about us..
"I connected with Steven Moreno at Ridgeline Western Construction about a year ago when I was scoping out a project. Steven’s knowledge blew me away from framing, additions, new construction, materials, etc. He broke everything down like it was nothing & in a way that I actually could understand. The company is based out of Fontana and covers a huge range from San Bernardino and Riverside all the way through Los Angeles and Orange County. So if you’re in that area and need a general contractor that you can rely on then I would highly recommend Ridgeline Western Construction to get the job done right."
- Thomas Shields
.png)
.png)
GET STARTED
TEXT/CALL (909) 676-2814
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.