.png)
Ridgeline Western Construction
Framing • Additions • New Construction • Remodeling • Residential • Commercial
House Framing
House framing sets the foundation for every wall, floor, and roof in a building. Ridgeline Western Construction handles all phases of framing, from initial layout through sheathing and hardware installation. We work directly from engineered plans, build with both dimensional and engineered lumber, and deliver framing that is ready for inspection and the trades that follow.
Why Choose Ridgeline Western Construction for House Framing
Framing is the backbone of any structure, supporting everything from the roof load to the finish materials inside and out. At Ridgeline Western Construction, each project begins with site measurements and a review of the engineering—making sure layout matches both the plans and the realities on the ground. We work with dimensional lumber, LVLs, glulams, and PSL beams, assembling every structural element with the right fasteners and connectors. Simpson Strong-Tie seismic hardware, solid blocking, and code-compliant shear panels all get installed before city inspections, so nothing is left to guesswork.
After walls are stood and trued, floor and roof systems are built to carry the loads above. We install structural sheathing, all required hardware, and prepare for rough-in trades by coordinating with electricians and plumbers. Our framing is set up to close inspection cycles cleanly, minimizing callbacks or delays. If structural revisions are needed mid-build, we coordinate directly with the engineer to keep the process moving.
At the end of framing, customers have a ready-to-inspect structure—square, level, and engineered to code. All city inspection records and documentation are managed to completion. By self-performing framing, we know exactly what’s inside the walls, which means the next phase starts on solid ground.
Inspection-Ready Delivery
We build framing for smooth city inspections—clear layout, all hardware exposed, and permit documents in order. Because framing is self-performed, we can answer inspector questions directly and make corrections immediately if needed. This keeps projects on schedule for the rough trades and prevents cycle delays.
Engineered Materials and Hardware
Our framing uses dimensional lumber, engineered wood like LVL and glulam beams, seismic connectors, and shear panels selected for each job's requirements. We install Simpson Strong-Tie hardware at all specified points. This focus on the right materials and assemblies supports the structure through earthquakes, heavy weather, and future remodels.
Owner-Onsite Structural Review
The owner of Ridgeline Western Construction is a framing specialist who stays involved from layout through final inspection. Every critical structure—load-bearing walls, headers, beams, and hardware—is double-checked against the plans on site. This means framing isn’t just managed, it’s actively built, so issues get spotted and solved before they become problems.
Need House Framing?
Get your house framing estimate today.
About Our House Framing Services
Ridgeline Western Construction is owner-operated by Steven Moreno, a general contractor and framing specialist who is on every project from scope meeting through final walkthrough. Framing is not handed off to a subcontractor—we build it ourselves, which means the same person setting your layout is there to answer city inspectors. We use engineered drawings, manage structural engineering revisions in real time if the jobsite reveals complications, and are bonded and insured for every framing scope. Every material—from dimensional studs to PSL beams and seismic hardware—is installed with the long-term integrity of the structure in mind. If you want a contractor who builds the frame, not just manages it, that’s what sets us apart.
WHY PROPERTY OWNERS CHOOSE US
5 Star Rated ★
Licensed & Insured ⛨
ABOUT US
Ridgeline Western Construction
Frequently Asked Questions
Yes. Ridgeline Western Construction is a licensed California Class B general building contractor, fully insured.
Our license number is #1147197Ridgeline Western Construction is based out of San Bernardino serving them and communities throughout southern California including Riverside, Los Angeles, and Orange County.
If you don't see your city listed, reach out and we'll confirm coverage.Framing, home additions, ADU construction, new home construction, whole-home remodeling, structural work, fire damage rebuilds, and commercial construction in Fontana, CA & throughout San Bernadino. The Owner Steven Moreno is an expert in framing and carpentry with anything falling outside of expertise being managed through him allowing you to have your building under one contract.
Yes. Every starts with engineering and permitting mapped out, and closes with inspections and a completed permit record from the building department. You get documentation for every phase.
Framing and carpentry are performed by us. Electrical, plumbing, HVAC, and roofing are handled by licensed subcontractors that we schedule and manage under the same contract that way you have one point of contact for your project.
Call or text Steven at +1 (909) 676-2814. Go over your project, plans or interest in a plan.. Then he'll walk through the scope and put together an estimate for you to continue
OTHER SERVICES
Ridgeline Western Construction offers a full range of construction services throughout San Bernardino, Riverside, Los Angeles, and Orange counties.
Home Additions
A home addition is a major structural project, not just an expansion of space. Ridgeline Western Construction manages every phase, from structural planning and engineering to permits, framing, finishing, and inspections. One contract covers all trades—the framing and carpentry are always self-performed, and every specialist is scheduled and supervised to keep the work moving as a single project. You get a finished addition designed to meet code, with a permit record that documents every inspection step.
Structural Repairs
Structural repairs address failures in a building’s framing, supports, or load paths that compromise stability or safety. Ridgeline Western Construction assesses visible symptoms — such as cracks in walls, sloping floors, or sticking doors — and traces them to structural causes like deteriorated joists, broken beams, or damaged shear walls. We deliver repairs from assessment through city inspection, rebuilding compromised structure and managing every required trade. You get one contractor who diagnoses, repairs, and sees the project to completion with a permit record that clears.
Load-Bearing Wall Removal
Load-bearing wall removal means opening up spaces by taking out structural walls safely and correctly. Ridgeline Western Construction evaluates framing, load paths, and shear points before any wall comes down. We coordinate engineering, secure the permit, handle inspections, and manage all steps from shoring to finish. You get open space where the structure stays sound, and your permit record matches what was built.
Some property types we work on
What Our Clients Say about us..
"I connected with Steven Moreno at Ridgeline Western Construction about a year ago when I was scoping out a project. Steven’s knowledge blew me away from framing, additions, new construction, materials, etc. He broke everything down like it was nothing & in a way that I actually could understand. The company is based out of Fontana and covers a huge range from San Bernardino and Riverside all the way through Los Angeles and Orange County. So if you’re in that area and need a general contractor that you can rely on then I would highly recommend Ridgeline Western Construction to get the job done right."
- Thomas Shields
.png)
.png)
GET STARTED
TEXT/CALL (909) 676-2814
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.