.png)
Ridgeline Western Construction
Framing • Additions • New Construction • Remodeling • Residential • Commercial
Skylight Installation & Flashing
Proper skylight installation means more than cutting a hole and placing glass. Ridgeline Western Construction manages the fit, weatherproofing, and finish of every skylight, addressing roof slope, underlayment, and flashing details to reduce future leaks. We handle the entire process under one contract, coordinating framing, drywall, and roofing so the opening is structurally sound and closes out clean with code-compliant inspections. You get a skylight that is built into the roof, not just set on top.
Why Choose Ridgeline Western Construction for Skylight Installation & Flashing
Adding a skylight changes more than just the room below. A watertight result starts with understanding how the new opening affects the roof structure, rafters, and decking. At Ridgeline Western Construction, we start with a framing assessment to position the skylight without weakening key load paths, then strip roofing down to solid sheathing and cut to the rough size. The install uses manufacturer-specified underlayment, step flashing, and perimeter counterflashing, plus ice and water shield if required by local code or roof pitch. We coordinate with a licensed roofing partner to tie the assembly into your existing roofing system, not just patch around the glass.
Inside, we repair insulation, frame the lightwell as needed, finish drywall, and paint for a complete installation—no unfinished edges. Honest tradeoff: on older or brittle roofs, tying in new flashing can expose weaknesses in the surrounding material; this sometimes means budgeting for a larger patch or partial reroof to get a proper seal.
Final inspections cover both the roof's structural adjustment and weatherproof integrity. You receive a clean permit record and know any roof changes meet code and the manufacturer’s specs. A skylight installed by Ridgeline Western Construction is built to last—not just temporarily watertight but integrated into the building’s structure and finish.
Integrated Structural Framing
Ridgeline Western Construction handles skylight installation with owner-level framing skill. We assess rafter layouts and reinforce any compromised load paths to keep the roof sound. The opening is framed according to the roof's structural needs, not just the skylight's dimensions. This reduces issues with sagging, stress cracks, or shifting down the line.
Complete Interior and Exterior Finish
With framing, drywall, insulation, trim, and paint all under our management, Ridgeline Western Construction finishes both sides of the skylight for a cohesive result. You do not have to coordinate trades or chase after unfinished surfaces—we close out the project with every element done and inspected, so the end product is a finished skylight, not just an opening.
Manufacturer-Specified Flashing and Roofing
We use manufacturer-recommended flashing kits, step flashing, and waterproof underlayment—never shortcuts or generic materials. Our licensed roofing partner ties the skylight into your existing roofing with careful shingle or tile integration, so the assembly stands up to weather and passes inspection. This process reduces leak risk compared to surface-mount installations.
Need Skylight Installation & Flashing?
Get your skylight installation & flashing estimate today.
About Our Skylight Installation & Flashing Services
Ridgeline Western Construction is owner-operated by Steven Moreno, a general contractor and framing specialist who is on every project from scope meeting through final walkthrough. For skylight installation, this means you get a builder who reads roof structure the way a framer does, not just a window installer. We self-perform framing and carpentry, coordinate with a licensed roofing partner, and handle every step from weatherproofing to interior finish. Whether adding a new skylight to an addition or integrating one into an existing house, we manage the process under a single contract and steward your permit record from start to finish.
WHY PROPERTY OWNERS CHOOSE US
5 Star Rated ★
Licensed & Insured ⛨
ABOUT US
Ridgeline Western Construction
Frequently Asked Questions
Yes. Ridgeline Western Construction is a licensed California Class B general building contractor, fully insured.
Our license number is #1147197Ridgeline Western Construction is based out of San Bernardino serving them and communities throughout southern California including Riverside, Los Angeles, and Orange County.
If you don't see your city listed, reach out and we'll confirm coverage.Framing, home additions, ADU construction, new home construction, whole-home remodeling, structural work, fire damage rebuilds, and commercial construction in Fontana, CA & throughout San Bernadino. The Owner Steven Moreno is an expert in framing and carpentry with anything falling outside of expertise being managed through him allowing you to have your building under one contract.
Yes. Every starts with engineering and permitting mapped out, and closes with inspections and a completed permit record from the building department. You get documentation for every phase.
Framing and carpentry are performed by us. Electrical, plumbing, HVAC, and roofing are handled by licensed subcontractors that we schedule and manage under the same contract that way you have one point of contact for your project.
Call or text Steven at +1 (909) 676-2814. Go over your project, plans or interest in a plan.. Then he'll walk through the scope and put together an estimate for you to continue
OTHER SERVICES
Ridgeline Western Construction offers a full range of construction services throughout San Bernardino, Riverside, Los Angeles, and Orange counties.
Home Additions
A home addition is a major structural project, not just an expansion of space. Ridgeline Western Construction manages every phase, from structural planning and engineering to permits, framing, finishing, and inspections. One contract covers all trades—the framing and carpentry are always self-performed, and every specialist is scheduled and supervised to keep the work moving as a single project. You get a finished addition designed to meet code, with a permit record that documents every inspection step.
Dormer Addition
A dormer addition creates new usable space and brings in natural light by extending a roof line. Ridgeline Western Construction handles the structural engineering, framing, and all trades needed for a dormer, from plan check to interior finish. We keep the project under one contract and coordinate every step, so both roof and structure are built to current code and signed off at inspection.
Siding Installation
Siding installation by Ridgeline Western Construction means one contract covering removal of old siding, assessment and repair of underlying framing, installation of new siding systems, and final paint or finish. We self-perform framing and carpentry, manage the entire project sequence, and coordinate any stucco, window integration, or other trades the job requires. Siding projects are built to pass inspection and close clean, whether it is fiber cement, engineered wood, or traditional lap siding.
Some property types we work on
What Our Clients Say about us..
"I connected with Steven Moreno at Ridgeline Western Construction about a year ago when I was scoping out a project. Steven’s knowledge blew me away from framing, additions, new construction, materials, etc. He broke everything down like it was nothing & in a way that I actually could understand. The company is based out of Fontana and covers a huge range from San Bernardino and Riverside all the way through Los Angeles and Orange County. So if you’re in that area and need a general contractor that you can rely on then I would highly recommend Ridgeline Western Construction to get the job done right."
- Thomas Shields
.png)
.png)
GET STARTED
TEXT/CALL (909) 676-2814
Service Areas
We provide listings of areas we serve if you don't see your city then contact us to confirm.